Reasons for Unstable Voltage of Environmental Protection Lime Kiln Equipment

The environmental protection lime kiln manufacturer explains the reasons for unstable voltage of environmental protection lime kiln equipment:

1. Too high voltage of quick lime production line will easily lead to too high temperature in the kiln, which will lead to too long burning belt and higher height of materials in the kiln. In the quicklime production line, with the increase of materials in the kiln, the granulation state of materials will be poor, and the amount of dust that can only be returned to the kiln from the cooler will also increase. Therefore, in this case, we need to reasonably reduce the feeding amount.

2. When there is underfire or serious material leakage in the environmental protection lime kiln, the transmission current is usually lower than the normal value and tends to decrease. At this time, we need to take a reasonable way to prevent, in order to ensure the smooth progress of the calcination operation.

3. Once the environmental protection lime kiln forms a ring, the materials will gradually accumulate to different degrees, and then directly sent to the burning belt through the ring, which will directly cause the burning belt to be too short, abnormal agglomeration and other phenomena. Therefore, in the process of calcining lime at high temperature, we must pay attention to the stability of voltage and the calcination temperature on the display at any time. In case of any abnormality, take corresponding measures in time.

4. In the quicklime production line, if the voltage suddenly increases and decreases, it is easy to cause great damage to the equipment, which will greatly reduce the working efficiency of quicklime, cause waste of resources, and increase the investment cost of users.

Therefore, in order to ensure the stable operation of the quicklime production line in the calcination operation, it is necessary to configure appropriate voltage for the equipment to ensure the voltage stability in the calcination process, so as to better meet the production and improve the working efficiency of the quicklime production line.

The content of this article comes from the network. If you have any questions, please contact me to delete it!